The TE212P 2 port E1/T1/J1 card with hardware echo cancellation VPMOCT128 module suit for any country using E1 T1 or J1 circuits. You can connect it to any digital PBX with these ports available, your local telco or T1/E1 channels banks.
E1 circuits are used in Asia, Europe, South America and Middle East T1 circuits are used in USA, Canada J1 circuits are used in Japan
Key features --supports Asterisk/Trixbox/Elastix; --supports Zaptel and Dahdi - 2 E1/T1/J1 CARD -PCI 3.3V interface -With hardware Echo Cancellation module VPMOCT128 -- ISDN PRI protocol --Support SS7
Key benefits --Creat a wide range of ISDN PRI PBX --ISDN least cost router --Voice over IP PRI gateways --VoIP integration of ISDN equipment --PBX to PBX trunking --Call center --IVR
TE212P is combination of TE210+VPMOCT128 Echo Cancellation modules, It is PCI3.3V interface
The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server. Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications. The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features. The TE210P supports a 3.3V PCI slot only - typically available on newer server motherboards and in 64-bit PCI bus architectures.
The VPMOCT128 provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancellation. VPMOCT128 enables users to eliminate echo tails up to 128ms or 1024 taps across all 128 channels in E1 mode or 96 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.
1)configuration & interface --2 X E1/T1/J1 --PCI 3.3V slot --With Echo Cancellation VPMOCT128 module --2 PRI port total 60 channels
Warranty 1 year
***Please run below content when installing